Standard Drawing Specification - Lifting Lug with Cheek Plates

Foreword

Kezar Engineering is an engineering company that operates globally and haves its headquarter in Brazil. We aren’t equipment manufacturer and the list of services provided by us can be found in our website https://kezareng.com. Our specifications and templates are public available as part of our Open Knowledge Program and available under Creative Commons Attribution 4.0 International License (CC BY-NC-ND 4.0).

Introduction

The purpose of this Standard Drawing Specification (SDS) is to establish basic guidelines for leg supports drawing for pressure vessels. By defining a standard way to draw, we make sure that all drawings are consistent and with same quality.

1. Scope

This standard drawing specification (SDS) contains pre-designed lifting lugs with cheek plates to be used in Pressure Vessels. Links to drawing, bill of materials (BOM) and calculation ara available in Section 3.

Lugs with cheek plates are a type of lug designed to be used with shackles. The cheek are used to make sure that only one shackle size can be used during lifting, making it a safer option.

2. How to Use This Specification

There are two ways you can use this specification:

1. Add it to the BOM (Bill of Materials) and then add a callout to the drawing. See example in Table 2.1 below.
2. Copy all the information needed from the specification to a new drawing.

3. Download

4. Language

The official language for all documents generated by Kezar Engineering is english but, there are cases in which a second language must be added. In these cases, the Engineer must check KZR-LNG-01 (Translated Technical Terms List) specification for translation suggestions and KZR-DWG-01 (Pressure Vessel Drawing Specification) for how to create double language drawings.

5. Disclaimer