Standard Drawings Database

KZR-DWG-02 Rev. 00 06.10.2024 PDF

Foreword

Kezar Engineering is an engineering company that operates globally and haves its headquarter in Brazil. We aren’t equipment manufacturer and the list of services provided by us can be found in our website https://kezareng.com. Our specifications and templates are public available as part of our Open Knowledge Program and available under Creative Commons Attribution 4.0 International License (CC BY-NC-ND 4.0).

Introduction

The purpose of this specification is to establish basic guidelines to how to download and use standard drawings. By standard drawing we mean drawing that can be used without modification, although minor modifications may be acceptable in some cases. Example of standard drawing are flanges, pipes and heads.

Note (1):

This specification should not be confused with the Standard Drawing Specification (SDS). The SDS provides basic guidelines on how to create standard drawings, while the Standard Drawings Database (SDD) provide guidelines to how to use standard drawings already finalized and available in the Files page.

1. Scope

2. Flanges

Table 2.1 - SDD - Flange List

Filename	Format	Rev. #	Description	Date	Link
kzr-dwg-02-001	dwg	0	Welding Neck Flanges as per ASME B16.5, 150# to 1500#	21.10.24	Download
kzr-dwg-02-002	dwg	0	Blind Flanges as per ASME B16.5, 150# to 1500#	21.10.24	Download

3. Open Knowledge Program

All CAD drawings available under this specification is part of our Open Knowledge Program and can be downloaded under Creative Commons Attribution (CC BY-NC-ND 4.0).

4. Support

Files, documents and specifications which are part of Open Knowledge Program have limited support but feel free to contact us through the Contact page.

5. Disclaimer

This specification was created to be used by Kezar Engineering company but, as stated in the Foreword, we have made it available for public use.

When used by a company/person other than Kezar Engineering, the company/person agrees that Kezar Engineering shall not be held liable for any damages, losses, or negative outcomes arising from the use, misuse, or misinterpretation of the information provided in the specification. The company/person is solely responsible for verifying the suitability of the specification for their intended application and assumes all risks associated with its use.